B.O.D Incubator

Temperature: Standard temperature range of our BOD Incubators is 5°C to 60°C. In incubation process, temperature accuracy and uniformity both are important; therefore, our BOD incubators are equipped with digital PID controller supported by PT100 sensor for temperature settings that displays both SV (set value) and PV (process value). Temperature accuracy is ± 0.5°C and uniformity remains ± 1°C.
Illumination: For illumination, we use fluorescent or LED light, which is door operated use can also individual switch it On or OFF permanently.
Safety: There are some safety features in our BOD Incubators such as over temperature and over current protection and temperature low and high limit buzzer alert etc.
Cooling: For cooling temperature under BOD Incubator, we use CFC free refrigeration system of reputed brand in the market such as EMERSON.
Heating: Heating is done by ISI mark U shaped tubular air heaters.
Air circulation: Air circulation is mandatory to spread uniform temperature inside the chamber; for this we use axial fans or motorized blower system.
Construction: Our BOD incubators are made keeping durability in mind. Construction is durable and double walled; exterior is made of thick mild steel and powder coated; while, interior is made of stainless steel. The gap between these two walls is filled with PUF insulation. Outer door is solid and there is also an inner door made of glass to view samples. Outer door has mechanical door lock and key.
Trays: Each BOD Incubator is provided with 2 to 5 removable trays. These trays are removable and height adjustable and made of steel wire mesh cable.

TECHNICAL PARAMETERS OF BOD INCUBATOR

Usable Space in MM	405 x 405 x 405	610 x 450 x 410	845 x 500 x 400	870 x 570 x 560	900 x 650 x 570	700 x 900 x 650
Capacity	2 cu. ft	4 cu. ft	6 cu. ft	10 cu. ft	12 cu. ft	15 cu. ft
Approx Volume (Ltr)	60 ltrs	113 ltrs	173 ltrs	282 ltrs	342 ltr	421 ltrs
No. of Shelves	2	2	2	2	2	2
Temperature Range	5°C above ambient to 60°C (Resolution 0.1°C)
Temp. Controller	By Microprocessor Based PID Digital Temperature Indicator and Controller.
Temp. Accuracy	+0.5°C
Display	LED Display for Set Value(SV) and Process Value (PV)
Relay	Solid state electronic relay with protective heat sink.
Auto Tuning System	System is compatible with auto tuning system
Air Circulation	By forced convection system
Insulation	By High density PUF insulation
Operations	Nearly silent operation with ultra-low vibration
Voltage Indicator	By Digital Volt Meter fitted on Panel
High Voltage Protection	Through automatic voltage stabilizer (Optional)
Electric Supply	220/230V AC, 50/60Hz

Enquire Now